Hey Checkyourlogs Fans,

I know we love Windows Admin Center for pretty much all things Storage Spaces Direct. However, at this time there are a few things that are missing for our wonderful HTML5 UI. The most important thing for Storage Spaces Direct admins is visibility into the ReFS, Deduplication, and Data Integrity logs.

There has been much discussion around the Storage Spaces Direct Community surrounding volumes that go offline due to the DRT (Dirty Region Tracking) tables filling up. This
normally happens when there is a catastrophic event to the cluster such as a hard power failure. Now, it doesn’t happen all the time and from what I have seen in the field only about 5% of cases during a hard failure will this be the case. Now, in the event, you are one of the unlucky 5% you will have event ID’s showing up in the Data Integrity\Crash Recovery event logs.

Because there wasn’t great tracking of this issue, I decided to make a little report and use it as a daily operators report.

Here are some examples of what I want to look for:

  • Storage Spaces Driver Event Log
    • I can see that the last event happened over 6 months ago and it was because a drive went offline. I was pulling the disk at this time, but it could indicate a failure that has or is about to happen. So each morning I read this, and if an event pops up, I can see there is something to action.



  • For Windows Server 2019 I always use Deduplication, and I can see the statistics here, and I can also check the Deduplication Events to make sure everything looks good.



  • Next, you can gather a lot of additional information from the ReFS log regarding stats on the CSV’s for Storage Spaces Direct.


  • Now for the secret sauce – Data Integrity Scans are scheduled by default to run monthly for ReFS enabled Storage Spaces Direct volumes. It does this as kind of a background scrubbing to make sure everything is ok. We do not want to see errors in here.


  • Lastly the log that you DO NOT want to see activity in is the Data Integrity\Crash Debug. If you see activity in here something bad has happened an,d you need to investigate. As you can see in the example below on Sept 7, 2018, a crash recovery scan was initiated. This does not normally start on a schedule and will only kick in if something bad has happened. As mentioned this could be a Network Failure, Power Failure or other catastrophic event.


Now there are some other goodies in the script like:

  • Storage Pool Info
  • Storage Enclosure Info
  • Physical Disk Info
  • Virtual Disk Info


Now you have read this far you are probably wondering where you can find the scripts required for this:


<#
    .SYNOPSIS
    Creates a HTML Report describing Storage Spaces Status, Deduplication, ReFS, Data Integrity, and VM Checkpoints/Replicas
   
   	Original Version by :Michael Rüefli (www.miru.ch) - https://gallery.technet.microsoft.com/scriptcenter/Storage-Spaces-Status-2e8e7fbb
    Updated Version by Dave Kawula MVP (www.checkyourlogs.net) @DaveKawula
    Moved up to Github to allow for community edits.
	
	THIS CODE IS MADE AVAILABLE AS IS, WITHOUT WARRANTY OF ANY KIND. THE ENTIRE 
	RISK OF THE USE OR THE RESULTS FROM THE USE OF THIS CODE REMAINS WITH THE USER.
	
	Version 1.2.0 (stable), January 22th, 2015
    Version 2.0.0 (stable), November 16, 2018
	
    .DESCRIPTION
	
    This script creates a HTML report showing the following information about a Windows
    Storage Spaces environment.
	
	* Report Generation Time, Reported Node
	* Storage Pools
	* Storage Enclosures
	* Virtual Disks
    * Physical Disks with Enclosure Mapping
    * MPIO Path Information per physical Disk
    * Storage Spaces Driver Events
    * Storage Tiering Statistics
    * Tested with Storage Spaces and Storage Spaces Direct
    * Runs locally on each node
    * Gathers Diagnostic information for Storage Spaces (ReFS, Data Integrity Scans)
    * Reports on Deduplication
    * Updated and runs on 2016 and 2019
	
  	
	.PARAMETER StorageNode
    The hostname of the storage node to query

	.PARAMETER IncludeMPIO
	This switch enables MPIO Information gathering
	
	.PARAMETER IncludeEvents
	This switch enables Eventlog Information gathering

    .PARAMETER IncludeTieringStats
	This switch enables Storage Tiering statistics gathering

    .PARAMETER OutputFile
	This parameter can be used to select an alternate output file location than %TEMP%\StorageReport.html

    .PARAMETER IncludeEvents
	This switch opens the report file with the default handler right after creation

    .PARAMETER MailFrom
	Email address to send to. Passed directly to Send-MailMessage as -From
	
	.PARAMETER MailTo
	Email address to send to. Passed directly to Send-MailMessage as -To
	
	.PARAMETER MailServer
	SMTP Mail server to attempt to send through. Passed directly to Send-MailMessage as -SmtpServer
    
    .PARAMETER IncludeDedupStats
    Gathers Information on Deduplication on the Storage Pools will work on ReFS and NTFS volumes with Deduplication Enabled

    .PARAMETER IncludeRefSDebugEvents
    Gathers infromation from the ReFS Event Logs

    .PARAMETER IncludeVMInfo
    Gathers General Information about the Hyper-V VM's and is used for Project Titan for Replicas / CheckPoints
     
    Note --> I have Hard coded the SMTP Settigns for now.
	.EXAMPLE
    Generate the HTML report and send it via Email
    .\CreateStorageReport.ps1 -StorageNode SOFSN01 -IncludeMPIO -IncludeEvents -OutputFile C:\Reports\StorageReport_demo.html -MailFrom storage@domain.com -Mailto support@domain.com -MailServer smtp.domain.com

    .NOTES
    Changes / Bugfixes
    V 1.1.0
    - Fixed Storage Enclosure Sensor Health errors
    - Added Physical Disk Reliability Counters
    - Fixed Pool gathering where physical disks where displayed multiple times
    - changed -Mailto Parameter to be an array of Strings to support multiple recipients

    V 1.2.0
    - Added Storage Tiering Statistics (-IncludeTieringStats)

    V 2.0 
    - Added Reporting for ReFS
    - Added Reporting for Deduplication
    - Added Reporting for Data Integrity Scans
    - Added Reporting for Hyper-V Checkpoint and general VM Info
    #>

Param(
    [Parameter(Mandatory=$True)]
    [STRING]$StorageNode,
    
    [Parameter(Mandatory=$false)]
    [SWITCH]$IncludeMPIO,

    [Parameter(Mandatory=$false)]
    [SWITCH]$IncludeEvents,

    [Parameter(Mandatory=$false)]
    [SWITCH]$IncludeTieringStats,

    [Parameter(Mandatory=$false)]
    [STRING]$OutPutFile="$ENV:TEMP\StorageReport_$StorageNode.html",

    [Parameter(Mandatory=$false)]
    [SWITCH]$OpenFileAfterCreation,
    
    [Parameter(Mandatory=$false)]
    [STRING]$MailFrom,

    [Parameter(Mandatory=$false)]
    [STRING[]]$MailTo,

    [Parameter(Mandatory=$false)]
    [STRING]$MailServer,

    [Parameter(Mandatory=$false)]
    [SWITCH]$IncludeDedupStats,

    [Parameter(Mandatory=$false)]
    [SWITCH]$IncludeReFSDebugEvents,

    [Parameter(Mandatory=$false)]
    [SWITCH]$IncludeVMInfo
)

$VerbosePreference="continue"

#We can add this back in later --> For now we are running this all locally
#Create Persistent Remote Session
#Write-Verbose "Creating new WinRM Ression with Computer: $StorageNode"
#$PSSession = New-PSSession -ComputerName $StorageNode

#region data gathering
#Get Storage Enclosure Info
Write-Verbose "Gathering Enclosure Information"
$Enclosures = Invoke-Command -ScriptBlock {
    $Enclosures = Get-StorageEnclosure | select *
    $EnclosureInfo = @()
    Foreach ($e in $Enclosures)
    {

        $eFANState = $e.FANOperationalStatus -join "."
        $ePWRSupplyState = $e.PowerSupplyOperationalStatus -join "."
        $eIOContrState = $e.IOControllerOperationalStatus -join "."
        $eTempSensorState = $e.TemperatureSensorOperationalStatus -join "."

        $encinfo = New-Object -TypeName PSObject -Property @{
            FriendlyName=$e.FriendlyName
            UniqueID=$e.UniqueId
            SerialNumber=$e.SerialNumber
            Firmware=$e.FirmwareVersion
            Slots=$e.NumberOfSlots
            HealthState=$e.HealthStatus
            IOControllerState=$eIOContrState
            FANState=$eFANState
            PowerSupplyState=$ePWRSupplyState
            TemperatureSensorState=$eTempSensorState
        }
        $EnclosureInfo += $encinfo
    }
    return $EnclosureInfo 
}

#Get Storage Pool Info
Write-Verbose "Gathering Storage Pool Information"
$StoragePoolInfo = Invoke-Command -ScriptBlock  {
    $StoragePoolInfo = @()
    $StoragePools = Get-StoragePool | Where-Object {$_.FriendlyName -ne 'Primordial'} 
    Foreach ($sp in $StoragePools)
    {
        $PoolObject = New-Object -TypeName PSObject -Property @{
            FriendlyName=$sp.FriendlyName
            SizeGB=($sp.Size / 1GB)
            AllocatedGB=($sp.AllocatedSize / 1GB)
            AllocatedPercent=[System.Math]::Round((100/$sp.Size)*($sp.AllocatedSize), 2)
            IsClustered=$sp.IsClustered
            EnclosureAwareDefault=$sp.EnclosureAwareDefault
            OperationalStatus=$sp.OperationalStatus
            HealthStatus=$sp.HealthStatus
        }
        $StoragePoolInfo += $PoolObject
    }
    Return $StoragePoolInfo
}

#Get virtual Disks
Write-Verbose "Gathering Virtual Disk (Spaces) Information"
$VirtualDiskInfo = Invoke-Command -ScriptBlock  {
    $StoragePools = Get-StoragePool
    $VirtualDiskInfo = @()

    Foreach ($sp in $StoragePools)
    {
        $VirtualDisks = Get-VirtualDisk -StoragePool $sp
        Foreach ($vd in $VirtualDisks)
        {
            $StorageTiers = $vd  | Get-StorageTier
            If ($StorageTiers)
            {
                Write-Verbose "Gathering Storage Tier Information"
                $IsTiered=$true
            }
            Else
            {
                $IsTiered=$false
            }
            
            $VirtualDiskobj = New-Object -TypeName PSObject -Property @{
            FriendlyName=$vd.FriendlyName
            StoragePool=$sp.FriendlyName
            ResiliencySettingName=$vd.ResiliencySettingName
            NumberOfDataCopies=$vd.NumberOfDataCopies
            NumberofColumns=$vd.NumberofColumns
            Interleave=$vd.Interleave
            IsEnclosureAware=$vd.IsEnclosureAware
            SizeGB=($vd.Size / 1GB)
            WriteCacheSizeGB=($vd.WriteCacheSize / 1GB)
            IsTiered=$IsTiered
            SSDTierSizeGB=(($StorageTiers | Where-Object {$_.MediaType -eq 'SSD'}).Size / 1GB)
            HDDTierSizeGB=(($StorageTiers | Where-Object {$_.MediaType -eq 'HDD'}).Size / 1GB)
            OperationalStatus=$vd.OperationalStatus
            HealthStatus=$vd.HealthStatus
            }
            $VirtualDiskInfo += $VirtualDiskobj
        }      

    }  
    Return $VirtualDiskInfo
}


#Get Physical Disks
Write-Verbose "Gathering Physical Disk Information"
$PhysicalDiskInfo = Invoke-Command -ScriptBlock  {
    #$Enclosures = $USING:Enclosures
    $PhysicalDiskInfo = @()

    $pdisks = Get-PhysicalDisk | where {($_.canpool) -or ($_.CannotPoolReason -match 'In a Pool')}
    Foreach ($pd in $pdisks)
    {
        $opsdata = Get-StorageReliabilityCounter -PhysicalDisk $pd
        $findstrg = $pd.PhysicalLocation -match '[0-9a-z]{16}'
        $EnslosureID = $matches[0]
        $dskobj = New-Object -TypeName PSObject -Property @{
            Name=$pd.FriendlyName
            Slot=$pd.SlotNumber
            EnclosureID=($EnslosureID)
            EnclosureSerial=($Enclosures | where-object {$_.UniqueId -eq $EnslosureID}).SerialNumber
            HealthState=$pd.HealthStatus
            Manufacturer=$pd.Manufacturer
            Model=$pd.Model
            FirmwareVersion=$pd.FirmwareVersion
            OperationalState=$pd.OperationalStatus
            MediaType=$pd.MediaType
            SizeGB=($pd.Size /1GB)
            Usage=$pd.Usage
            ID=$pd.UniqueId
            SerialNumber=$pd.SerialNumber
            PowerOnHours=$opsdata.PowerOnHours
            Temperature=$opsdata.Temperature
            TemperatureMax=$opsdata.TemperatureMax
            StartStopCycleCount=$opsdata.StartStopCycleCount
            MaxReadLatency_ms=$opsdata.ReadLatencyMax
            MaxWriteLatency_ms=$opsdata.WriteLatencyMax
            ReadErrors=$opsdata.ReadErrorsTotal
            WriteErrors=$opsdata.WriteErrorsTotal
        }
        $PhysicalDiskInfo += $dskobj
        }
    Return $PhysicalDiskInfo
}


If ($IncludeMPIO)
{
    #Get MPIO Info
    Write-Verbose "Gathering MPIO Path Information per Disk"
    $MPIOPathInfo = Invoke-Command -ScriptBlock {
        $StoragePools = Get-StoragePool | Where-Object {$_.FriendlyName -ne 'Primordial'} 
        $MPIOInfo = $StoragePools | Get-PhysicalDisk | Foreach-Object {mpclaim -s -d $_.DeviceID}
        Return $MPIOInfo
    } | Select-String "paths"
}

If ($IncludeDedupStats){
    Write-Verbose "Gathering Deduplication Statistics"

    $DedupStatus = Get-DedupStatus | Select-Object *
    $DedupVolumeStats = Get-dedupvolume D: | Select * 
    $Dedupevents = Get-WinEvent -MaxEvents 10 -LogName Microsoft-Windows-Deduplication/Diagnostic | Select-Object *
    $DedupDiagevents = Get-WinEvent -MaxEvents 10 -LogName Microsoft-Windows-Deduplication/Scrubbing | Select-Object *
}

If ($IncludeReFSDebugEvents){
    Write-Verbose "Gathering ReFS Operational Events"

     $ReFSEvents = Get-WinEvent -MaxEvents 10 -LogName Microsoft-Windows-ReFS/Operational | Select-Object * 
     $DataIntegrityAdmin = Get-WinEvent -MaxEvents 10 -LogName Microsoft-Windows-DataIntegrityScan/Admin | Select-Object * 
     $DataIntegrityCrash = Get-WinEvent -MaxEvents 10 -LogName Microsoft-Windows-DataIntegrityScan/CrashRecovery | Select-Object * 
}

If ($IncludeVMInfo){
    Write-Verbose "Gathering Hyper-V VM Information"
     $VMInfo = @()
     $VMInfo += Get-VM -ComputerName Localhost
#     $VMInfo += Get-VM -ComputerName EPFCS2D2
      
     $VMReplicaInfo = @()
     $VMReplicaInfo =  Get-VM -ComputerName Localhost | Get-VMSnapshot
     #$VMReplicaInfo =  Get-VM -ComputerName EPFCS2D2 | Get-VMSnapshot
}


If ($IncludeEvents)
{
    Write-Verbose "Gathering Storage Spaces Driver Events"
    #Get Storage Spaces Driver Events
    $StorageSpaceDriverEvts = Invoke-Command -ScriptBlock {
        Get-WinEvent -MaxEvents 20 -LogName  "Microsoft-Windows-StorageSpaces-Driver/Operational"
    }
}

If ($IncludeTieringStats)
{
    #Get Storage Tiering Statistics
    Write-Verbose "Gathering Storage Tiering Statistics"
    $TieringStats = Invoke-Command -ScriptBlock {

        $TierStats=@()
        $StorageOptInfo = get-winevent -LogName "Microsoft-Windows-Storage-Tiering/Admin" | ? {$_.ID -eq 22}
        Foreach ($entry in $StorageOptInfo)
        {
            $entrydate=$entry.TimeCreated
            $info = $entry.Message
            $info -match 'Percent of total I/Os serviced from the SSD tier: [0-9]{1,3}%' | out-null ; $FastTierHitRate = $matches[0]        
            $info -match 'Current size of the faster .* tier: [0-9]{1,3},[0-9]{1,2}.*?GB' | out-null ; $CurrentFastTierSize = $matches[0]        
            $info -match '100%.*?[0-9]{1,3},[0-9]{1,2}.*?[G|M|K|T]B' | out-null; $FastTierSizeReq100 = ($matches[0]).trim()
            $info -match '95%.*?[0-9]{1,3},[0-9]{1,2}.*?GB|MB|KB' | out-null; $FastTierSizeReq95 = $matches[0]
            $info -match '90%.*?[0-9]{1,3},[0-9]{1,2}.*?GB|MB|KB' | out-null; $FastTierSizeReq90 = $matches[0]
            $info -match '85%.*?[0-9]{1,3},[0-9]{1,2}.*?GB|MB|KB' | out-null; $FastTierSizeReq85 = $matches[0]
            $info -match '80%.*?[0-9]{1,3},[0-9]{1,2}.*?GB|MB|KB' | out-null; $FastTierSizeReq80 = $matches[0]
            $info -match '[a-z0-9]{8}-[a-z0-9]{4}-[a-z0-9]{4}-[a-z0-9]{4}-[a-z0-9]{12}' | out-null; [string]$VolumeGuid = $matches[0]
            $Volume = get-volume | ? {$_.path -match $VolumeGuid}
            $VolumeName = $Volume.FileSystemLabel
            $volinfo = New-Object -TypeName PSObject -Property @{
                Date=$entrydate
                VolumeName=$VolumeName
                FastTierSize=$CurrentFastTierSize
                FastTierHitRate=$FastTierHitRate
                FastTierRequiredSize="$FastTierSizeReq100; $FastTierSizeReq90; $FastTierSizeReq80"
            }
            $TierStats += $volinfo

        }
        Return $TierStats
    }    
}
#endregion


#Remove Persistent Remote Session
#Write-Verbose "Removing WinRM Session"
#$PSSession | Remove-PSSession


#region output formatting
Write-Verbose "Constructing Output"
$Output = ""
$TableHdr = @"
<style>
BODY{background-color:white;}
TABLE{border-width: 1px;border-style: solid;border-color: grey;border-collapse: collapse;}
TH{border-width: 1px;padding: 4px;border-style: solid;border-color: grey;background-color:#000099;font-family:arial;font-size: 8pt; color: #FBFBEF;}
TD{border-width: 1px;padding: 4px;border-style: solid;border-color: grey;font-family:arial;font-size: 8pt; color: black;}
</style>
"@



$Output+="<html>
<body>
<font size=""2"" face=""Arial,sans-serif"">
<h2 align=""center"">Storage Spaces Report</h3>
<h3 align=""center"">Node: $StorageNode</h3>
<h5 align=""center"">Generated $((Get-Date).ToString())</h5>
</font>"

$output += "<html>
<body>
<font size=""3"" face=""Arial,sans-serif"">
<h3 align=""left"">Storage Pools</h3>
</font>"
$output += $StoragePoolInfo | ConvertTo-Html -Property FriendlyName,SizeGB,AllocatedGB,AllocatedPercent,EnclosureAwareDefault,IsClustered,OperationalStatus,HealthStatus -Head $TableHdr | Foreach {
    If ($_ -like "*<td>Healthy</td>*") 
    {
        $_ -replace "<tr>", "<tr bgcolor=#CEF6CE>"
    }
    Else 
    {
        $_ -replace "<tr>", "<tr bgcolor=#F6CEE3>"
    }
}
$Output += " "

$output += "<html>
<body>
<font size=""3"" face=""Arial,sans-serif"">
<h3 align=""left"">Virtual Disks ( $($VirtualDiskInfo.count) )</h3>
</font>"
$output += $VirtualDiskInfo | ConvertTo-Html -Property FriendlyName,StoragePool,ResiliencySettingName,NumberOfDataCopies,NumberofColumns,Interleave,IsEnclosureAware,SizeGB,WriteCacheSizeGB,IsTiered,SSDTierSizeGB,HDDTierSizeGB,OperationalStatus,HealthStatus -Head $TableHdr | Foreach {
    If ($_ -like "*<td>Healthy</td>*") 
    {
        $_ -replace "<tr>", "<tr bgcolor=#CEF6CE>"
    }
    Else 
    {
        $_ -replace "<tr>", "<tr bgcolor=#F6CEE3>"
    }
}
$Output += " "


$output += "<html>
<body>
<font size=""3"" face=""Arial,sans-serif"">
<h3 align=""left"">Storage Enclosures ( $($Enclosures.count) )</h3>
</font>"
$output += $Enclosures | Sort-Object FriendlyName | ConvertTo-Html -Property FriendlyName,UniqueId,SerialNumber,Firmware,Slots,HealthState,PowerSupplyState,FANState,IOControllerState,TemperatureSensorState -Head $TableHdr | Foreach {
    If ($_ -like "*<td>Healthy</td>*") 
    {
        $_ -replace "<tr>", "<tr bgcolor=#CEF6CE>"
    }
    ElseIf ($_ -like "*<td>Unknown</td>*") 
    {
        $_ -replace "<tr>", "<tr bgcolor=#FFFF99>"
    }
    Else 
    {
        $_ -replace "<tr>", "<tr bgcolor=#F6CEE3>"
    }
}
$Output += " "

$output += "<html>
<body>
<font size=""3"" face=""Arial,sans-serif"">
<h3 align=""left"">Physical Disks ( $($PhysicalDiskInfo.count) )</h3>
</font>"
$output += $PhysicalDiskInfo | Sort-Object MediaType -Descending |  ConvertTo-Html -Property Name,Slot,Id,EnclosureID,Temperature,Mediatype,SizeGB,Manufacturer,Model,SerialNumber,FirmwareVersion,usage,OperationalState,HealthState,MaxReadLatency_ms,MaxWriteLatency_ms,PowerOnHours,TemperatureMax $TableHdr | Foreach {
    If ($_ -like "*<td>Healthy</td>*") 
    {
        $_ -replace "<tr>", "<tr bgcolor=#CEF6CE>"
    }
    Else 
    {
        $_ -replace "<tr>", "<tr bgcolor=#F6CEE3>"
    }
}
$Output += " "

If ($IncludeMPIO)
{
    $output += "<html>
    <body>
    <font size=""3"" face=""Arial,sans-serif"">
    <h3 align=""left"">MPIO Disk Path Info</h3>
    </font>"
    $output += $MPIOPathInfo |  ConvertTo-Html -Property Line | Foreach {
        If ($_ -like "*02 Paths*") 
        {
            $_ -replace "<tr>", "<tr bgcolor=#CEF6CE>"
        }
        Else 
        {
            $_ -replace "<tr>", "<tr bgcolor=#F6CEE3>"
        }
    }
    $Output += " "
}

If ($IncludeEvents)
{
    $output += "<html>
    <body>
    <font size=""3"" face=""Arial,sans-serif"">
    <h3 align=""left"">Storage Space Driver Events</h3>
    </font>"
    $output += $StorageSpaceDriverEvts |  ConvertTo-Html -Property TimeCreated,ID,LevelDisplayName,Message | Foreach {
        If ($_ -like "*<td>Warning</td>*") 
        {
            $_ -replace "<tr>", "<tr bgcolor=#FFFF99>"
        }
        ElseIf ($_ -like "*<td>Error</td>*")
        {
            $_ -replace "<tr>", "<tr bgcolor=#F6CEE3>"
        }
        Else 
        {
            $_ -replace "<tr>", "<tr bgcolor=#66CCFF>"
        }
    }
}

If ($IncludeTieringStats)
{
    $output += "<html>
    <body>
    <font size=""3"" face=""Arial,sans-serif"">
    <h3 align=""left"">Storage Tiering Statistics</h3>
    </font>"
    $output += $TieringStats |  ConvertTo-Html -Property Date,VolumeName,FastTierSize,FastTierHitRate,FastTierRequiredSize

}

if ($IncludeDedupStats){

 $output += "<html>
    <body>
    <font size=""3"" face=""Arial,sans-serif"">
    <h3 align=""left"">Deduplication Statistics</h3>
    </font>"
    $output += $DedupStatus |  ConvertTo-Html -Property Volume,Capacity,FreeSpace,SavingsRate,SavedSpace,UnoptimizedSize,UsedSpace,InPolicyFilesCount,InPolicyFileSize    
    

  $output += "<html>
    <body>
    <font size=""3"" face=""Arial,sans-serif"">
    <h3 align=""left"">Deduplication Events</h3>
    </font>"
    $output += $Dedupevents |  ConvertTo-Html -Property TimeCreated,ID,LevelDisplayName,Message | Foreach {
        If ($_ -like "*<td>Warning</td>*") 
        {
            $_ -replace "<tr>", "<tr bgcolor=#FFFF99>"
        }
        ElseIf ($_ -like "*<td>Error</td>*")
        {
            $_ -replace "<tr>", "<tr bgcolor=#F6CEE3>"
        }
        Else 
        {
            $_ -replace "<tr>", "<tr bgcolor=#66CCFF>"
        }
        }
    
   $output += "<html>
    <body>
    <font size=""3"" face=""Arial,sans-serif"">
    <h3 align=""left"">Deduplication Data Scrubbing</h3>
    </font>"
    $output += $DedupDiagevents |  ConvertTo-Html -Property TimeCreated,ID,LevelDisplayName,Message | Foreach {
        If ($_ -like "*<td>Warning</td>*") 
        {
            $_ -replace "<tr>", "<tr bgcolor=#FFFF99>"
        }
        ElseIf ($_ -like "*<td>Error</td>*")
        {
            $_ -replace "<tr>", "<tr bgcolor=#F6CEE3>"
        }
        Else 
        {
            $_ -replace "<tr>", "<tr bgcolor=#66CCFF>"
        }
        }
}

    If ($IncludeTieringStats)
{
    $output += "<html>
    <body>
    <font size=""3"" face=""Arial,sans-serif"">
    <h3 align=""left"">Storage Tiering Statistics</h3>
    </font>"
    $output += $TieringStats |  ConvertTo-Html -Property Date,VolumeName,FastTierSize,FastTierHitRate,FastTierRequiredSize

}

if ($IncludeReFSDebugEvents){

 $output += "<html>
    <body>
    <font size=""3"" face=""Arial,sans-serif"">
    <h3 align=""left"">ReFS Operational Events</h3>
    </font>"
    $output += $ReFSEvents |  ConvertTo-Html -Property TimeCreated,ID,LevelDisplayName,Message | Foreach {
        If ($_ -like "*<td>Warning</td>*") 
        {
            $_ -replace "<tr>", "<tr bgcolor=#FFFF99>"
        }
        ElseIf ($_ -like "*<td>Error</td>*")
        {
            $_ -replace "<tr>", "<tr bgcolor=#F6CEE3>"
        }
        Else 
        {
            $_ -replace "<tr>", "<tr bgcolor=#66CCFF>"
        }
        }

    $output += "<html>
    <body>
    <font size=""3"" face=""Arial,sans-serif"">
    <h3 align=""left"">Data Integrity Admin Events</h3>
    </font>"
    $output += $DataIntegrityAdmin |  ConvertTo-Html -Property TimeCreated,ID,LevelDisplayName,Message | Foreach {
        If ($_ -like "*<td>Warning</td>*") 
        {
            $_ -replace "<tr>", "<tr bgcolor=#FFFF99>"
        }
        ElseIf ($_ -like "*<td>Error</td>*")
        {
            $_ -replace "<tr>", "<tr bgcolor=#F6CEE3>"
        }
        Else 
        {
            $_ -replace "<tr>", "<tr bgcolor=#66CCFF>"
        }
        }

    $output += "<html>
    <body>
    <font size=""3"" face=""Arial,sans-serif"">
    <h3 align=""left"">Data Integrity Crash Debug Events</h3>
    </font>"
    $output += $DataIntegrityCrash |  ConvertTo-Html -Property TimeCreated,ID,LevelDisplayName,Message | Foreach {
        If ($_ -like "*<td>Warning</td>*") 
        {
            $_ -replace "<tr>", "<tr bgcolor=#FFFF99>"
        }
        ElseIf ($_ -like "*<td>Error</td>*")
        {
            $_ -replace "<tr>", "<tr bgcolor=#F6CEE3>"
        }
        Else 
        {
            $_ -replace "<tr>", "<tr bgcolor=#66CCFF>"
        }
        }
    }


If ($IncludeVMInfo)
{
    $output += "<html>
    <body>
    <font size=""3"" face=""Arial,sans-serif"">
    <h3 align=""left"">Hyper-V Titan Info </h3>
    </font>"
    $output += $VMInfo |  ConvertTo-Html -Property Name,State,CPUUsage,MemoryAssigned,Uptime,Status,Version
    If ($_ -like "*<td>Operating normally</td>*") 
    {
        $_ -replace "<tr>", "<tr bgcolor=#CEF6CE>"
    }
    Else 
    {
        $_ -replace "<tr>", "<tr bgcolor=#F6CEE3>"
    }

$Output += " "
    
    $output += "<html>
    <body>
    <font size=""3"" face=""Arial,sans-serif"">
    <h3 align=""left"">Hyper-V Replica Info </h3>
    </font>"
    $output += $VMReplicaInfo |  ConvertTo-Html -Property VMName,Name,Snapshottype,Creationtime,ParentSnapshotName
    
}
    #endregion


#Generate the output file
Write-Verbose "Writing Output to File $OutPutFile"
$output | Out-File $OutPutFile -Force
$emailbody = get-content $OutPutFile -Raw

#Openfile with default handler if switch is present
Write-Verbose "Opening Outputfile $OutPutFile"
If ($OpenFileAfterCreation)
{
    Invoke-Item  $OutPutFile
}





$Username ="username"

$Password = ConvertTo-SecureString "Passwordgoeshere" -AsPlainText -Force

$credential = New-Object System.Management.Automation.PSCredential $Username, $Password

$SMTPServer = "smtp.sendgrid.net"

$EmailFrom = "Titan-Operations-No-Reply@blah.com"

$EmailTo = "blah@blah.com"

$Subject = "Titan - Storage Spaces Report"

#$Body = "SendGrid testing successful"

#Mail the Report
#If ($MailTo -and $MailFrom -and $MailServer)
#Fore Mail to go with Hard Coded Parameters for now
    Send-MailMessage -From $EmailFrom -To $EmailTo -SmtpServer $SMTPServer -Credential $credential -Port 587 -Subject "Storage Spaces Report: $StorageNode" -Encoding UTF8 -BodyAsHtml -Body $output


#Send-MailMessage -smtpServer $SMTPServer -Credential $credential -Port 587 -from $EmailFrom -to $EmailTo -subject $Subject -Body $emailbody -BodyAsHtml 





Write-Verbose "Report Created Successfully"


 

https://github.com/dkawula/Operations/blob/master/S2D/StorageSpacesReport-Titan.ps1

And a scheduled task if you want to automate this. The Schedule task will run if you create a local administrator service account. Even on the Storage Spaces Direct Nodes.

https://github.com/dkawula/Operations/blob/master/S2D/Titan%20Daily%20Health%20Report.xml

Now, I know the script isn’t perfect by any means but it does the job and even has a mailto function so that you can have this emailed to you on a triggered basis or as a daily health check report.

I hope you find this usefule and if you have ideas for improvements let’s collaborate via Github.

Thanks,


Dave


Advertisements